24Hour Callout

CALL NOW: (916) – 447-7014

24Hour Callout

CALL NOW: (916) – 447-7014
Water Heater Replacement And Installation Roseville, CA

Because water heaters run without any problems most of the time, it can be easy to forget that they need regular maintenance to help you get the most out of them. In fact, ignoring the signs that your water heater must be repaired is one of the most common reasons for their failure, which can be complicated and costly to replace.

There are a few simple maintenance tips you can do when you start to see signs that it must be repaired. Should all else fail, all you need to do is to hire a water heater replacement and installation Rancho Murieta, CA service.

If you find that your water heater suddenly becomes less effective may simply have set the thermostat up or down slightly to better match the needs of your home.

If you find a leak, you should have a plumber come and check your water heater to find out where the leaks came from and fix it as soon as possible.

Start by checking the hot water running from the faucets. Signs that the heater should be serviced are a strange smell, the presence of sediment and debris, or strange colored water. Another thing you may find is that your heater is running more often and does not produce hot water for as long as usual. Ignoring signs that your water heater should be serviced also means you are paying a much larger utility bill than you need to be.

You may also see the presence of a rusty-colored liquid around the anode rod, or even on the floor around the boiler. This is one of the biggest signs that a water heater must be repaired.

This is a common problem with water heaters that can be handled by most homeowners is the removal of sediment in the reservoir. If you notice sediment or a strange color or odor in the water, grab a hose and a brush. Using the hose, empty the tank down a drain or in your yard (make sure to turn the heater at least one hour before starting.)

Rub the inside of the tank, especially where you see a lot of sediment using a nylon brush. You can also use a small amount of vinegar to dissolve stubborn sediments left by hard water. If you see a red or orange liquid in the anode rod or on the floor, use bleach to clean the stem.

Drain the tank with a hose, add a quart of bleach in the tank. Let the water refill, and let stand for at least two hours. Empty the tank again and you should see your anode cleaning.

Knowing the signs that your water heater must be maintained and understand how to manage the basic maintenance on your own will help you get the most use out of your water heater.

For a full-on water heater replacement, simply reach out to your water heater replacement and installation Rancho Murieta, CA contractor right away.

Request A Callback

Our team will be in touch as soon as possible to discuss your needs.

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.